How much does a FPV setup cost?

A First Person View (FPV) setup typically consists of a camera, video transmitter, receiver, antenna, and goggles. The cost of a complete FPV setup can vary greatly depending on the features and quality of the components. A basic setup could cost as little as $100, while a high-end setup could cost several thousand dollars.

At the lower end of the budget, the most important component is the camera. A basic camera such as the Runcam Micro Eagle 2 should cost around $20 and will provide an acceptable image for basic FPV flying. The video transmitter (VTX) is the device that sends the video signal from the camera to the receiver, and a basic VTX such as the Eachine TX805 can be purchased for around $20. The receiver is the device that receives the signal from the VTX and relays it to the goggles. A basic VTX/RX combo such as the Eachine ROTG02 should cost around $30.

The antenna is the device that transmits and receives the signal from the VTX/RX. There are several types of antennas available, but a basic omni-directional antenna such as the Eachine RHCP should cost around $20. Finally, the goggles are the device used to view the FPV image. A basic pair of goggles such as the Eachine EV100 should cost around $50.

The total cost for the basic setup above is around $120. This type of setup will be adequate for basic FPV flying and is a great starting point for those just getting into the hobby.

For a more advanced setup, you can expect to spend significantly more. A high-end camera such as the Runcam Eagle 2 Pro can cost around $100, while a high-end VTX/RX combo such as the Eachine ROTG02 Pro costs around $60. Higher-end antennas such as the Eachine RHCP 5.8G Circular Polarized are around $30, while a pair of high-end FPV goggles such as the Fatshark Dominator V3 can cost around $400.

The total cost for this type of setup is around $590, which is significantly more expensive than the basic setup. However, the improved image quality and range offered by this type of setup makes it well worth the extra cost for those serious about FPV flying.

In conclusion, the cost of an FPV setup can vary greatly depending on the components used. A basic setup can cost as little as $100, while a high-end setup can cost several hundred dollars. Ultimately, the choice of components should be tailored to the budget and the type of flying that will be done.

Was this article useful? 👍 0 👎 0 👀 3 Rating: Posted by: 👨 Robert R. Dinh

Add new comment/question

Comments / Question

👤 💬

Are there any budget-friendly options for purchasing an FPV setup?

👨 📜

Yes, there are budget-friendly options for purchasing an FPV setup. Many online retailers offer starter kits that include all the necessary components for a basic FPV setup. These kits usually include a camera, transmitter, receiver, and other accessories such as antennas and cables. Additionally, some retailers offer used or refurbished FPV equipment at discounted prices.

👤 💬

What additional costs should be expected when buying an FPV setup?

👨 📜

In addition to the cost of the FPV setup itself, there are several additional costs to consider. These include:
1. Batteries: Depending on the type of FPV setup, you may need to purchase additional batteries to power your system.
2. Antennas: You may need to purchase additional antennas to improve the range and quality of your FPV signal.
3. Receivers: If you plan to use multiple receivers, you will need to purchase additional receivers.
4. Video Transmitter: If you plan to broadcast your FPV video feed, you will need to purchase a video transmitter.
5. Video Goggles: If you plan to view your FPV video feed, you will need to purchase video goggles.
6. Accessories: You may need to purchase additional accessories such as mounting brackets, cables, and other items.

👤 💬

What is the most cost-effective way to purchase an FPV setup?

👨 📜

The most cost-effective way to purchase an FPV setup is to buy the components separately. This allows you to customize the setup to your specific needs and budget. You can buy the frame, motors, ESCs, flight controller, camera, transmitter, receiver, and other components separately. This will give you the most flexibility and the best value for your money.

👤 💬

How much does each component of an FPV setup cost?

👨 📜

The cost of an FPV setup can vary greatly depending on the components you choose. Generally, a basic FPV setup will cost around $200-$300, but a more advanced setup can cost up to $1000 or more. The main components of an FPV setup include a camera, video transmitter, receiver, antenna, and goggles. The cost of each component can vary significantly, but a basic camera can cost around $50, a video transmitter can cost around $50-$100, a receiver can cost around $50-$100, an antenna can cost around $20-$50, and goggles can cost around $100-$200.

👤 💬

What is the average cost of a complete FPV setup?

👨 📜

The average cost of a complete FPV setup can range anywhere from $200 to $1000 or more depending on the quality of components and the type of aircraft being used.