GEPRC Thinking P16 4K 40mm 3S Cinewhoop Whoop FPV Racing Drone PNP/BNF Caddx Loris Cam F4 12A ESC 1103 8000KV
199.99 USDBrand: GEPRC
Introduction: Thinking P16 4K comes with the GEP-12A-F4 AIO which is a highly integrated and stable board that weighs only 5.6g. Supporting up to 4S Lipo and 12A continuous current for each ESC, GEP-12A-F4 AIO gives you confidence while you are trying to push your Thinking P16 4K to its limit. GR1103 8000kv motors and 1.6’’ props combined with a 3S 300mah Lipo battery gives Thinking P16 4K a stable but responsive flying characteristic. This highly efficient powertrain gives you 4 minutes of indoor acrobatics。Just like all other GEPRC quads, Thinking P16 HD has been pre-tuned and fully assembled by the GEPRC team before you receive it! Simply bind it to your transmitter or attach your favorite receiver, then you are ready to enjoy your all-new Thinking P16 HD.
- Brand: GEPRC
- Item: Thinking P16 HD
- Flight Controller: GEP-12A-F4 AIO
- Camera: Caddx Loris 4K
- Motor to motor: 79mm
- Propeller: Gemfan 1635
- Antenna: 5.8G
- Motor: GR1103 8000KV
- Weight: 64g without battery
- Receiver: Without Receiver(PNP)/Frsky R-XSR / Frsky XM+ / FlySky A8S / TBS NanoRX
Flight Controller: GEP-12A-F4 AIO
- MCU: STM32F411
- Gyro: MPU6000
- OSD: BetaFlight OSD w/ AT7456E chip
- Firmware target: GEPRCF411
- ESC: 12A * 4 BLHeli_S (Dshot/Multishot/OneShot)
- VTX: 5.8GHz (48 Channel IRC Tramp, PIT/25/100/200mW)
- Build-in Caddx Loris 4K 60fps
- Whoop style frame with prop guards. Safe to fly indoor and around soft objects.
- Stable GEP-12A-F4 AIO flight control with Betaflight OSD.
- High-efficiency powertrain provides 4 minutes of indoor flying.
- Compact design, 79mm from the motor to motor.
- Weighs only 55g w/o battery and receiver.
- 1x Thinking P16 4K CineWhoop Drone
- 4x GEMFAN 1636
- 2x Battery strap 15*120
- 1x 1.5mm L screwdriver
- 1x 5.8G Antenna
Was this article helpful? 👍 0 👎 0 👀 4 Rating:
Images: GEPRC Thinking P16 4K 40mm 3S Cinewhoop Whoop FPV Racing Drone PNP/BNF Caddx Loris Cam F4 12A ESC 1103 8000KV
Click here add new review/comment