iFlight TurboBee 136RS 136mm SucceX Micro F4 V1.5 3 Inch 4S DIY FPV Racing Drone PNP w/ Caddx.us Turbo Eos V2 1200TVL Ca

Brand: iFlight
Notice: It is DIY Version. Comes unassembled. Need BUILD by yourself.
Specification: Brand Name: iFlightModel: 136RSItem Name: 136mm F4 4S DIY 3 Inch FPV Racing DroneVersion: PNP ( Without Receiver, Lipo Battery, Radio Transmitter)Drone Wheelbase: 136mmMaterial: 3K Carbon Fiber + 3D TPU CanopyArm Plate Thickness: 3mmDrone Net Weight: Around 60.5g

iFlight SucceX Micro F4 V1.5 Flight Controller	MCU: STM32F411Input Voltage 2-4S LipoGyroscope: MPU6000Betaflight OSD: YESBlackbox FLASH: 8MBBEC 5V 2.5A cont.Firmware: IFF411_PRO(IFRC)Size: 21x21mmMounting Holes: 16x16mm (M3)Weight: 2.5g-2x UART ports-4x motor outputsF.PORT protocol RX input support, telemetry NOT supported.
iFlight XING-E 1104 4200KV Brushless Motor	Model: XING-E Item Name: 1104 4200KV / 8300KV 2-4S Brushless Motor KV: 4200KV Cable Length: 60mm Quantity: 4 PC Shaft Diameter: 1.5mm Weight: 5g
iFlight SucceX Micro 15A V2.1 4in1 Brushless ESC	Firmware: G-H-30 BLS 16.7 Input Voltage : 2-4S LIPOContinuous Current: 15AMCU: BB21F16GBEC: NOCurrent sensor: yesESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.Size: 30x22mmMounting hole 16*16mmWeight: 3.6g
iFlight Nazgul T3020 3 Inch 2-Blade Propeller	Model: Nazgul T3020 Material: polycarbonate Mounting: 1.5mm center hole Color: Transparent Green Quantity: 4 CW & 4 CCW Hub Thickness: 5mm Weight: 0.9g/PC
iFlight 5.8G SucceX Micro 200mW VTX	Power: PIT/25/100/200mWAntenna interface: IPEX (UFL)VTX protocol: IRC TrampSize: 17x27mmMounting Holes: 16x16mmWeight: 1.6g
Caddx.us Turbo Eos V2 1200TVL FPV Camera	Brand Name: Caddx.usModel: Turbo Eos V2Item Name: 1200TVL 2.1mm Lens 16: 9 FPV Camera NTSC
Lipo Battery ( NOT Included)	Recommend 4S 450mAh 75C Lipo Battery XT30 Plug

Features: - 16x16mm SucceX Micro F4 Flight tower system - The lightest 1104 brushless motor on the market with double ball bearings- Light, Powerful and smooth configuration- 3mm bottom carbon fiber frame- Compatible 4S Lipo/LIHV
Package Included: 1x TurboBee 136RS Bottom Plate1x 3D Printing TPU Canopy ( Blue Color) 1x iFlight SucceX Micro F4 V1.5 Flight Controller Board1x iFlight SucceX Micro 15A V2.1 4in1 Brushless ESC Board4x iFlight XING-E 1104 4200KV Brushless Motor ( Black Color)1x iFlight 5.8G SucceX Micro 200mW VTX Module1x Caddx.us Turbo Eos V2 1200TVL FPV Camera4x iFlight Nazgul T3020 3 Inch 2-Blade Propeller CW ( Transparent Green Color)4x iFlight Nazgul T3020 3 Inch 2-Blade Propeller CCW ( Transparent Green Color)
2x iFlight 10x130mm Battery Strap1x 25V 220UF 6*11mm Capacitor
1x XT30U Connector Cable (18AWG)1x bag of Screws