Remote control Quadcopters, Airplanes, Helicopters and FPV Drone

Eachine E010S PRO 65mm 5.8G 40CH 800TVL Camera F3 Built-in OSD High Hold Mode RC Drone Quadcopter

Eachine E010S PRO 65mm 5.8G 40CH 800TVL Camera F3 Built-in OSD High Hold Mode RC Drone Quadcopter

 52.99 44.99 USD
Brand: Eachine Model: E010S PRO
Description:
Brand: Eachine
Item NO: E010S PRO
Take off weight: 29.5g
Battery Power: 3.7V 45C 240mAh
Flight Time: 3.5 mins
Wheelbase: 65mm
Frame: ABS high-quality
615 Coreless Motor:
Long diameter (without motor axis): 15mm
Wide diameter: 6mm
Weight: 4.8 g
Speed: 59000 rpm ± 12%
F3 Brush Flight Controller:
- Lemon F3 Flight Control is an open source flight control support the current international mainstream Betaflight platform
- Built-in DC-DC boost circuit, support 1S (4.2v) input, on-board 5V and 3.3V voltage output interface, external image transmission, 5V 1A current output, to ensure stability of the flight control and external equipment
- Drive motor frequency: 2K (this frequency can be set by the user, the maximum frequency can be set to 32K)
- Original BF OSD chip, real-time display flight control information; on-board barometer chip, support for air pressure setting; with gyroscope support manual mode, auto-stabilization mode, semi-auto-stabilization mode
- Firmware upgrades and configuration parameters via Micro-USB, Betaflight-Configuration

Compatible:
①Flysky Receiver : FS I4, FS I4X, FS I6, FS I6X, FS I6S, FS I10 Transmitter;
②Frsky Receiver : X7, X7S, X9D, X9DP, X12S, X10, X10S, XJT(D8 Mode), DJT(D8 Mode), DFT(D8 Mode) Transmitter;
③DSM2 Receiver: Spektrum All series Transmitter(DSM2 protocol)), Walkera D7E, D10, HOBBYKING T-SIX, Multi-protocol six-in-one tuner(DSM2)

Features: 1, STM32F303CCT6 master
2. MPU6050 sensor (IIC mode)
3, Betaflight OSD
4, BMP280 barometer
Camera:
Sensor: 1/3 "CMOS
Clarity: M7 800TVL camera
View Angle: 150° FOV horizontal view angle 170° DFOV opposite view angle
Signal system: NTSC/PAL (one-button switch)
Power consumption: [email protected]
Operating voltage: 3.6-5.5V
Lens mirror diameter: 2.1mm IR coated FOV150(Level)
Output impedance: 75 Ohm
Operating signal intensity: 23~24dBm
Output power: 25mW
Wireless channel: 40CH
Current: 100mA
Sound carrier: 6.5MHz
OSD: Support
Weight: 3.8g
Size: 26x20x18mm (without antenna)

Features:
1. Without assembly and commissioning
2. Open - source flight control can be adjusted according to the player 's personal preferences self - stability, semi - self - stability, Manually, High hold mode, OSD information display, convenient for different levels of players
3. According to the race standard RaceBand VTX CAM 40 channel transmitter, Cmos 1/3 800Tvl high-definition camera, NTSC / PAL system can be a key switch
Package included:
1 x Frame kit
4 x 615 59000 rpm ± 12% Coreless Motor
8 x Blades(2 Sets )
1 x F3_EVO_Brush Flight Controller
1 x 800Tvl 40cH 25mW Camera
1 x 3.7V 45C 240mAh battery
1 x USB Charger
1 x Manual
1 x Blade removal tool
💚 Read product details 💚

Was this article helpful?  👍 0   👎 0   👁 0  Rating:

Images: Eachine E010S PRO 65mm 5.8G 40CH 800TVL Camera F3 Built-in OSD High Hold Mode RC Drone Quadcopter




Click here add new review/comment

Similar RC Quadcopters